| Rolling Mills 22228EK Cylindrical Roller Bearings | P150°:5.78 kN; H2:20.637 mm; A2:153.988 mm; P120°:6.67 kN; Taconite seal:TER 14; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:40.7 N·m; Appropriate attachment bolt size G:0.5 in; h:22.225 mm; R1:23.813 mm; |
| Rolling Mills 549722 Cylindrical Roller Bearings | f:14 mm; d:130 mm; Mass lock washer:0.08 kg; M:125 mm; B:2 mm; d2:161 mm; d1:145 mm; |
| Rolling Mills 22212E Cylindrical Roller Bearings | Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:35.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:102000 N; D:150.0000 mm; Basic Dynamic Radial Load Rating C:117000 N; Oil Speed Rating Open/Shielded n2:4600 rpm; |
| Rolling Mills 36218.308 Cylindrical Roller Bearings | Lock washer / Locking clip:MS 30/500-96; d1:550 mm; d3:580 mm; d2:523 mm; G:Tr 500x5; h:15 mm; Associated eyebolt for handling:M 10; b:36 mm; Associated spanner:TMFN 500-600; Mass lock nut:34.9 kg; |
| Rolling Mills 574663 Cylindrical Roller Bearings | b:11.1 mm; Da max.:216 mm; r1,2 min.:3 mm; D:230 mm; Basic static load rating C0:930 kN; Reference speed:2600 r/min; B2 ≈:82 mm; d2 ≈:152 mm; Fatigue load limit Pu:88 kN; B:64 mm; |
| FAG 532465 Cylindrical Roller Bearings | Q120°:1800 kN; Appropriate attachment bolt, rec. tightening torque:1310 N·m; Oil level, min.:59 mm; Ca:140 mm; P55°:4000 kN; Cap bolt, rec. tightening torque:350 N·m; L:640 mm; P180°:1600 kN; Adapter sleeve:OH 3048 H; Bearing (basic designation):23048 K; |
| FAG 507518 Cylindrical Roller Bearings | P60°:230 kN; H1:160.325 mm; R1:95.25 mm; Max. speed for Taconite seal:590 r/min; Eye bolt:2 x 3/8-16 UNC; A2:279.4 mm; Pa:32.7 kN; P150°:80.1 kN; Stabilizing ring:SR-30-0; H2:63.5 mm; |
| Rolling Mills 803431 Cylindrical Roller Bearings | da min.:85.1 mm; r2 min.:1 mm; Material constant KM:330; Da max.:124.4 mm; b:9.3 mm; D:130.175 mm; Specific static load factor K0:300 N/mm²; α:8 °; C:61.9 mm; Mass plain bearing:4.55 kg; |
| Rolling Mills 580901 Cylindrical Roller Bearings | r1,2 min.:0.3 mm; Preload:650 N; ra max.:0.3 mm; Mass bearing:0.2 kg; D:42 mm; a:55 mm; d:12 mm; D2:32.1 mm; Attainable speed:5400 r/min; Static moment stiffness:50 N·m/mrad; |
| FAG 6026.C3 Cylindrical Roller Bearings | B:25.40 mm; Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:7500 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:30500 N; Basic Dynamic Radial Load Rating C:34100 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:10000 rpm; Sealed Speed Rating n3:7500 rpm; |
| FAG 566883 Cylindrical Roller Bearings | Dimension S1:19.8 mm; Basic Dynamic Radial Load Rating C:11200 N; Weight W:0.29 kg; Shaft Diameter D:25 mm; Height H:70.5 mm; Dimension H2:16.0 mm; Width A:32.0 mm; Distance JMAX:110.5 mm; Dimension N1:11.5 mm; Dimension H1:36.5 mm; |
| Rolling Mills 36209.112 Cylindrical Roller Bearings | d:95.25 mm; Design (sliding contact surface combination):Steel/steel; Mass plain bearing:8.1 kg; D:158.75 mm; dk:146.05 mm; α:9 °; Basic static load rating C0:2650 kN; Specific dynamic load factor K:150 N/mm²; Da max.:152.5 mm; b:10.5 mm; |
| Rolling Mills 619/750MB.C3 Cylindrical Roller Bearings | R2:36.513 mm; R1:79.375 mm; P90°:113 kN; P120°:73.8 kN; ba:63.5 mm; Labyrinth ring:2 x LOR 109; A2:206.375 mm; PosiTrac Plus contact element:2 x B10724-109; Mass pillow block:69.3 kg; RG:1/2 NPT; |
| Rolling Mills 802013 Cylindrical Roller Bearings | D:85.0000 mm; B:19.00 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Fillet Radius ra:1.00 mm; d:45.000 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:33200 N; Oil Speed Rating n2:9000 rpm; Accessories:Seal & Snap-Ring; |
| Rolling Mills 565323 Cylindrical Roller Bearings | B:28.00 mm; Sealed Speed Rating n3:2400 rpm; d:110.000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Dynamic Radial Load Rating C:81800 N; Basic Static Radial Load Rating Co:73500 N; D:170.0000 mm; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:4500 rpm; Fillet Radius ra:2.00 mm; |
| Rolling Mills 56205.1 Cylindrical Roller Bearings | Adapter sleeve assembly:SNW 16x2.5/8; Stabilizing ring:2 x SR-1616; h:33.337 mm; ba:30.163 mm; Housing:FSAF 516; Ca:42.799 mm; H2:31.75 mm; R2:21.431 mm; J min.:244.475 mm; Mass pillow block:16.8 kg; |