| Rolling Mills 6044M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:FLT; Bearing number:CBK-094; Outer Diameter (mm):76,2; T:28,575 mm; Bore Diameter (mm):34,925; D:76,2 mm; Size (mm):34.925x76.2x28.575; Width (mm):28,575; d:34,925 mm; B:29,37 mm; |
| Rolling Mills 581099 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Angle:6 °; d:50,8 mm; D:80,963 mm; Bearing number:GEZ50ET-2RS; Width (mm):44,45; Outer Diameter (mm):80,963; r1 min.:1 mm; Weight:0,93 Kg; Size (mm):50.8x80.963x44.45; Bore Diameter (mm):50,8; |
| Rolling Mills 576107 BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:160 mm; f:2,82 mm; b:3,1 mm; Bore Diameter (mm):90; Brand:NKE; a:4,9 mm; r1 min.:2 mm; Basic dynamic load rating (C):96 kN; Size (mm):90x160x30; d:90 mm; |
| Rolling Mills 6022.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Outer Diameter (mm):40; Fw:32 mm; Basic dynamic load rating (C):37,5 kN; B:25 mm; Weight:0,049 Kg; Bore Diameter (mm):32; (Grease) Lubrication Speed:14000 r/min; Ew:40 mm; Width (mm):25; Bearing number:K32x40x25; |
| Rolling Mills 511569 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Outer Diameter (mm):28; rmin:0,3 mm; Cr:5100 N / Dynamic loa; C0r:1420 N / Static load; nG Fett:75000 1/min / Limiti; m:0,014 kg / Weight; ra1 max:0,3 mm; ra max:0,3 mm; Bore Diameter (mm):15; r1 min:0,3 mm; |
| FAG 502279 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Y0:0.96; Min operating temperature, Tmin:-40 °C; r1 min.:2 mm; da max:65 mm; Mass:1.31 kg; Nlim (oil):4,800 rpm; d1:78.5 mm; Outer Diameter (mm):110; Inventory:0.0; ra1 max.:2 mm; |
| FAG NNU49/750S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bore Diameter (mm):33,338; R:1,5 mm; Bearing number:14134D/14276; r:1,3 mm; Brand:Timken; d:33,338 mm; D:69,012 mm; Outer Diameter (mm):69,012; B:39,182 mm; Width (mm):39,705; |
| FAG 512972 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:SKF; d1:33,7 mm; Bearing number:E2.YAR205-014-2F; C:15 mm; Bore Diameter (mm):22,225; Outer Diameter (mm):52; r1 min.:0,6 mm; Fatigue load limit (Pu):0,335; d:22,225 mm; Basic dynamic load rating (C):14 kN; |
| Rolling Mills 802148.H122BD BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:FAG; Designation Ruville:6507; Designation SX:CX064; Bearing number:713660170; Compatibility:VOLVO / 740 / engin; Designation SKF:VKBA 732; Designation SNR:R165.07; |
| Rolling Mills 24030S.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | B2:10 mm; B1:31 mm; Brand:ISO; Bearing number:1208K+H208; Width (mm):18; Size (mm):40x80x18; d1:35 mm; D:80 mm; C:18 mm; Outer Diameter (mm):80; |
| Rolling Mills 22310E.T41A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing number:208KRR2; Width (mm):27; d:40 mm; Bore Diameter (mm):40; Outer Diameter (mm):80; B:27 mm; Size (mm):40x80x27; C:21 mm; Brand:CYSD; D:80 mm; |
| Rolling Mills 572344 BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:320 mm; Bearing number:6236M; Bore Diameter (mm):180; d:180 mm; Outer Diameter (mm):320; Size (mm):180x320x52; Brand:CRAFT; C:52 mm; Width (mm):52; B:52 mm; |
| FAG 533683 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing Type:with grooved raceway; Bore Dia (d):6.0000; Ball Qty:7; Outer Diameter (mm):14; Radius (min) (rs):0.200; Bearing number:F6-14M; Bore Diameter (mm):6; Outer Dia. Pilot (D1):13.8000; Outer Dia (D):14.0000; Bore Dia. Clearance (d1):6.2500; |
| FAG 521910 BEARINGS FOR METRIC AND INCH SHAFT SIZES | B:20 mm; W:36 mm; dk:35,5 mm; C1 max:18 mm; d3:35 mm; Bore Diameter (mm):25; h1:94 mm; l3 min.:48 mm; l4 max.:126 mm; Bearing number:SI25ES; |
| FAG 514958 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Configuration:Single Row; r1:0.6 mm; Fillet Radius/Chamfer:1 mm; dc (min):34 mm; Dynamic Load Rating:35,000 N; ra1 (max):0.6 mm; Limiting Speed - Oil:14,000 rpm; Enclosure:Open; dd (min):37 mm; ra (max):1 mm; |
| Rolling Mills 16209.111 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Basic dynamic load rating (C):1154 kN; B:82 mm; Weight:68,2 Kg; Size (mm):360x540x82; Bore Diameter (mm):360; Brand:NKE; d:360 mm; r4 min.:5 mm; Width (mm):82; C:82 mm; |