| Rolling Mills 56207.104 BEARINGS FOR METRIC AND INCH SHAFT SIZES | B:46 mm; da(min):74; Weight:3,15 Kg; Bearing No.:32312CR; d:60 mm; Bearing number:32312CR; Basic static load rating (C0):310 kN; Brand:KOYO; T:48,5 mm; Y1:1.10; |
| Rolling Mills 575342 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Outer Diameter (mm):150; Size (mm):100x150x70; C:55 mm; D:150 mm; r1 min.:1 mm; Weight:4,44 Kg; r min.:1 mm; B:70 mm; Bearing number:GE100ES; Bore Diameter (mm):100; |
| FAG 533578 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):68.2625x125x68.26; d:68,2625 mm; B1:85,73 mm; Weight:2,418 Kg; L:6,4 mm; Width (mm):68,26; S:34,13 mm; Basic dynamic load rating (C):69,5 kN; B2:23,81 mm; F:86,92 mm; |
| FAG NNU4996S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):28x51.600x6; Brand:NTN; T:6,000 mm; d:28,000 mm; D:51,600 mm; Bore Diameter (mm):28,000; Bearing number:ARXJ28X51.6X6; Width (mm):6,000; Outer Diameter (mm):51,600; |
| Rolling Mills 22232EK BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:SNR; Size (mm):20x37x18; C:18 mm; Outer Diameter (mm):37; Width (mm):18; B:18 mm; D:37 mm; Bore Diameter (mm):20; d:20 mm; Angle (α):15 °; |
| Rolling Mills 619/710MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | S:20 mm; t1:4 mm; L2:12 mm; S1:9 mm; Appropriate Locknut No.:HM3048; i:17.5 mm; L3:25.5 mm; |
| Rolling Mills 23120EAS.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | Dynamic load, C:710 kN; Mass (without HJ ring):21.5 kg; (Grease) Lubrication Speed:2 400 r/min; D:260 mm; Size (mm):120x260x86; r1 min.:3 mm; r1a max:2.5 mm; Inventory:0.0; r1s min:3 mm; rs min:3 mm; |
| Rolling Mills 522010 BEARINGS FOR METRIC AND INCH SHAFT SIZES | d:80 mm; Weight:2,56 Kg; Bearing number:UK216L3; Basic dynamic load rating (C):72,7 kN; Brand:KOYO; D:140 mm; Size (mm):80x140x55; C:9 mm; Width (mm):55; |
| Rolling Mills SNV120 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Dimension F:12.63 in; Eng Internal Radial Clearance - Max:0.0055; Y2 - Geometry Factor:4.57; Dimension A:3.75 in; Int Radial Clearance Reduction Max:0.0025 in; Housing Style:Two-Bolt Pillow Bloc; Grease Lubrication - M/N Seal:1400 rpm; Dimension L:3.47 in; Dimension D Max:11.00 in; Bearing Number:22217; |
| Rolling Mills 24136ASK30.525605 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Lockwasher and Lockplates:W-26; B2:3.752 in; Sleeve:S-26; D1:6.755 in; Tolerance1:-0.005 in; Bearing Number:22226K; Locknut:AN-26; Diameter d :4 7/16 in; S:1.000 in; Taper:1:12; |
| Rolling Mills 36207.104 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing number:293/1600-E-MB; Brand:FAG; T3:255 mm; Db min:2303 mm; da min:1920 mm; nG:218 1/min / Limiting; C0a:196000000 N / Static; Width (mm):408; D:2280 mm; T:408 mm; |
| Rolling Mills 24126B.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | Features:Non-Contact Seals; Radius Rs min:0.150 mm; Bore Size d:6 mm; Weight:0.0019 Kg; Outside Ring Width B:3.500 mm; Grease Limiting Speed:48000 rpm; Oil Limiting Speed:56000 rpm; Cr - Dynamic Load Rating:1.1 kN; C0r - Static Load Rating:0.44 kN; Outside Diameter D:13.000 mm; |
| Rolling Mills 24030S.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | B2:10 mm; B1:31 mm; Brand:ISO; Bearing number:1208K+H208; Width (mm):18; Size (mm):40x80x18; d1:35 mm; D:80 mm; C:18 mm; Outer Diameter (mm):80; |
| Rolling Mills 540268A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:NSK; Width (mm):19,18; Bore Diameter (mm):40; Bearing number:R40-17; Size (mm):40x80x19.18; D:80 mm; Outer Diameter (mm):80; d:40 mm; T:19,18 mm; |
| FAG NNU49/750S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bore Diameter (mm):33,338; R:1,5 mm; Bearing number:14134D/14276; r:1,3 mm; Brand:Timken; d:33,338 mm; D:69,012 mm; Outer Diameter (mm):69,012; B:39,182 mm; Width (mm):39,705; |
| Rolling Mills 22311E.T41A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):40x68x15; Basic static load rating (C0):11,7 kN; Width (mm):15; d:40 mm; r1 min.:1 mm; r2 min.:1 mm; Outer Diameter (mm):68; Brand:NKE; C:15 mm; Bearing number:6008-2RS2; |