| Rolling Mills 573415 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Weight:17,8 Kg; B:75 mm; Ew:265 mm; Width (mm):75; Size (mm):190x265x75; d:190 mm; Bore Diameter (mm):190; r min.:2,1 mm; Brand:NSK; C:75 mm; |
| Rolling Mills 511045A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):12x32x10; Bearing number:1201 TN9; Outer Diameter (mm):32; D:32 mm; C:10 mm; Bore Diameter (mm):12; Basic static load rating (C0):1,40 kN; (Grease) Lubrication Speed:24480 r/min; B:10 mm; d:12 mm; |
| Rolling Mills 514278A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:LS; Outer Diameter (mm):19; Weight:0,018 Kg; Size (mm):8x19x12; Bearing number:GEBJ8C; Bore Diameter (mm):8; Width (mm):12; B:12 mm; Basic dynamic load rating (C):13 kN; D:19 mm; |
| Rolling Mills 802071.H122AG BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bore Size d:10 mm; Outside Diameter D:30.000 mm; Features:Shields; Weight:0.03 Kg; Radius Rs min:0.600 mm; Cr - Dynamic Load Rating:5.1 kN; Oil Reference Speed:32000 rpm; Clearance:C3; Grease Reference Speed:22000 rpm; Outside Ring Width B:9.000 mm; |
| FAG 533023 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Fw:16 mm; C:20 mm; Width (mm):20; Size (mm):16x24x20; Bearing number:RNAFW 162420; r min.:0,3 mm; Db:16,6 mm; Weight:0,032 Kg; db:19,6 mm; D:24 mm; |
| Rolling Mills SNV052 BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:288,925 mm; Outer Diameter (mm):288,925; Bore Diameter (mm):177,8; Size (mm):177.8x288.925x123.82; T:123,825 mm; Width (mm):123,825; Bearing number:T-94706D/94113+A; d:177,8 mm; Brand:NTN; |
| Rolling Mills 619/800MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | r1:0.3 mm; Configuration:Duplex; Basic static load rating (C0):8,25 kN; r1 min.:0.3 mm; Outer Diameter (mm):35; ra (max):0.6 mm; Weight:0.055 Kg; Da2 (max):32.4 mm; da min.:12 mm; Width (mm):11; |
| FAG 560371 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):10x14.55x11.85; Bore Diameter (mm):10; Outer Diameter (mm):14,55; D:14,55 mm; C:11,85 mm; Width (mm):11,85; Brand:INA; Bearing number:F-226931.2; d:10 mm; |
| Rolling Mills 22310E.T41A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Width (mm):63,5; Da max.:327 mm; Calculation factor (Y0):0,96; T:63,5 mm; ra max.:6,4 mm; Bearing number:M348449/M348410; Da min:319 mm; Basic dynamic load rating (C):726 kN; Size (mm):247.65x346.075x63.5; Db:330 mm; |
| FAG 537675 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Outer Diameter (mm):42; da min.:32 mm; Da max.:40 mm; Bore Diameter (mm):30; Width (mm):7; d1:34,1 mm; Basic dynamic load rating (C):4,16 kN; rb max.:0,15 mm; a:11,9 mm; Brand:SNFA; |
| Rolling Mills 575633 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Width (mm):24; D1:14,3 mm; Fw:8 mm; Bearing number:KLM08-1; Outer Diameter (mm):15; C:24 mm; C2:1,1 mm; Basic dynamic load rating (C):234 kN; Size (mm):8x15x24; D:15 mm; |
| Rolling Mills 575940 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Cb min:4,5 mm; Ca min:3,5 mm; rb max:1,3 mm; Db min:56 mm; nG:12800 1/min / Limiti; r3, 4 min:1,3 mm; C:11,811 mm; Da min:52 mm; da max:36 mm; e:0,41; |
| Rolling Mills 532301 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Dynamic load, C:1,490 kN; ra1 max.:3 mm; Da min:404 mm; Calculation factor (Y0):0,76; Characteristic inner ring frequency, BPFI:14.84 Hz; Cb min:26 mm; r1 min.:4 mm; Max operating temperature, Tmax:120 °C; Y0:0.76; Outer Diameter (mm):460; |
| FAG 6072MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):260x540x165; C:165 mm; d1:240 mm; Basic dynamic load rating (C):3050 kN; Basic static load rating (C0):4550 kN; Bore Diameter (mm):260; Brand:CX; B:165 mm; B2:39 mm; Width (mm):165; |
| Rolling Mills 507448 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:AST; OD Chamfer Length (Co):0.800; Bearing number:ASTEPB 1618-20; Bearing Outside Diameter, Nominal(Do):18.000; Bearing Bore after Mounting (di) - 16.102:16.032; Shaft Dia., Nominal (d):16.0000; Bore Diameter (mm):16; Outer Diameter (mm):18; Bearing Type:straight; Material:Molded plastic with; |
| FAG 61948M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bore Diameter (mm):100; Size (mm):100x170x71.6; d2:145 mm; d:100 mm; r3 min.:1,1 mm; Brand:NKE; r4 min.:1,1 mm; Basic static load rating (C0):400 kN; D:170 mm; r2 min.:1,1 mm; |