| Rolling Mills 22236EK BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bore Diameter (mm):1700; Bearing number:NU18/1700; Outer Diameter (mm):2060; Width (mm):160; d:1700 mm; B:160 mm; Brand:ISO; C:160 mm; Size (mm):1700x2060x160; D:2060 mm; |
| FAG 522071 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Features:Non-Contact Seals; Clearance:C3; Weight:5.150 Kg; Outside Diameter D:240.000 mm; Radius Rs min:2.100 mm; Outside Ring Width B:38.000 mm; Cr - Dynamic Load Rating:136.6 kN; Oil Reference Speed:5100 rpm; Grease Reference Speed:3500 rpm; C0r - Static Load Rating:135.4 kN; |
| Rolling Mills 801788 BEARINGS FOR METRIC AND INCH SHAFT SIZES | (Grease) Lubrication Speed:2600 r/min; Bore Diameter (mm):105; Outer Diameter (mm):225; C:49 mm; d:105 mm; Basic static load rating (C0):500 kN; Bearing number:NJ321 E; B:49 mm; Weight:8,99 Kg; D:225 mm; |
| Rolling Mills 36217.304 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:AST; Outer Width (Bo):22.0000; Bearing number:GE40ES; Material:52100 Chrome steel,; Inner Width (Bi):28.0000; Weight (g):318.00; Dynamic Load Rating (Cr):99,000; Static Load Rating (Cor):495,000; Bore Dia (d):40.0000; Outer Diameter (mm):62; |
| Rolling Mills 802111 BEARINGS FOR METRIC AND INCH SHAFT SIZES | (Grease) Lubrication Speed:1 600 r/min; C:100 mm; Bearing number:NN4952; Bore Diameter (mm):260; Width (mm):100; d:260 mm; r min.:2,1 mm; Brand:NTN; D:360 mm; B:100 mm; |
| Rolling Mills 22311EK.T41A BEARINGS FOR METRIC AND INCH SHAFT SIZES | l5:5 mm; D:19 mm; Size (mm):8x19x12; h1:36 mm; Outer Diameter (mm):19; l3 min.:16 mm; Angle:14 °; d2:24 mm; Weight:0,047 Kg; d5:16 r/min; |
| FAG 561269 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Basic static load rating (C0):404 kN; db:90 mm; C:44,45 mm; da:100 mm; Bearing number:6466/6420; Da:129 mm; d:76,2 mm; r min.:6,4 mm; Brand:KOYO; Db:141 mm; |
| Rolling Mills 22328E BEARINGS FOR METRIC AND INCH SHAFT SIZES | C90 - Dynamic Radial Rating (90 million revolutions)4:5520 lbf; Db - Cup Backface Backing Diameter:60.96 mm; Aa - Cage-Cone Backface Clearance:0.8 mm; r - Cup Backface To Clear Radius2:3.30 mm; e - ISO Factor8:0.33; da - Cone Frontface Backing Diameter:40.39 mm; a - Effective Center Location3:-10.2 mm; db - Cone Backface Backing Diameter:41.40 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:21300 lbf; |
| FAG 500857A BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:114,3 mm; Basic static load rating (C0):370 kN; Brand:NSK; Outer Diameter (mm):114,3; C:50,8 mm; d:74,612 mm; Width (mm):50,8; B:50,8 mm; Fw:88,9 mm; Bore Diameter (mm):74,612; |
| Rolling Mills 573594 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Ca - Axial Load Rating:5799.99 lbf; Cr - Dynamic Load Rating:94869 lbf; Dimension R:1.9 in; Tensioning Unit Type:Tension Type; Cor - Static Load Rating:131513 lbf; Dimension H:2.1 in; Dimension N:17.2 in; Dimension A:10.5 in; Support Type:Take-Up; Dimension P:1.0 in; |
| Rolling Mills 22222E.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | Brand:ISB; D:125 mm; Bearing number:2214 K; C:31 mm; Weight:1,5 Kg; B:31 mm; Width (mm):31; Size (mm):70x125x31; d:70 mm; Basic dynamic load rating (C):43,32 kN; |
| Rolling Mills 527184 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Width (mm):37; D:117 mm; Bearing number:F16010; Brand:Fersa; d:30 mm; Outer Diameter (mm):117; B:37 mm; Bore Diameter (mm):30; Size (mm):30x117x37; |
| Rolling Mills 802119 BEARINGS FOR METRIC AND INCH SHAFT SIZES | D1:10,719 mm; C:3,175 mm; D:9,525 mm; d:6,35 mm; Size (mm):6.35x9.525x3.175; C1:0,58 mm; r min.:0,1 mm; B:3,175 mm; Brand:ISO; Width (mm):3,175; |
| Rolling Mills 576367 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size (mm):120x215x40; (Grease) Lubrication Speed:2 900 r/min; Long Description:120MM Bore; 215MM Ou; snap ring included:Without Snap Ring; Manufacturer Item Number:6224; Fatigue limit load, Cu:4.6 kN; Dynamic load, C:155 kN; d:120 mm; Mass:5.15 kg; Category:Single Row Ball Bear; |
| Rolling Mills 574347 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Width (mm):23,812; Bearing number:2558/2523; C:19,05 mm; Outer Diameter (mm):69,85; Weight:0,468 Kg; Bore Diameter (mm):30,162; Brand:FBJ; D:69,85 mm; Basic dynamic load rating (C):69 kN; T:23,812 mm; |
| Rolling Mills 800903 BEARINGS FOR METRIC AND INCH SHAFT SIZES | nG:1420 1/min / Limitin; e:0,3; nB:810 1/min; da min:294,6 mm; Width (mm):140; ra max:3 mm; m:70,6 kg / Weight; Y1:2,23; Outer Diameter (mm):420; C0r:3950000 N / Static l; |