| 12.30.1800.000.11.1503 Standard 5 Slewing Ring Bearings | d3:220 mm; d1:152.4 mm; Mass adapter sleeve assembly:5.5 kg; B:33 mm; d:170 mm; Hydraulic nut:HMV 34 E; G:M 170x3; B1:101 mm; |
| 11.25.1800.000.11.1503 Standard 5 Slewing Ring Bearings | B:9.00 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Sealed Speed Rating n3:17000 rpm; Grease Speed Rating n1:24000 rpm; d:10.000 mm; Accessories:One Seal; D:30.0000 mm; Basic Static Radial Load Rating Co:2360 N; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:30000 rpm; Basic Dynamic Radial Load Rating C:5070 N; |
| 91.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | with cylindrical bore:670 min-1; Dynamic (Cr):9 mm; Pu:2240 kN; Oil:311.540 kN; Static (Cor):16.7 mm; Grease:3720 kN; d:260 mm; rs (min):4 mm; D:440 mm; B:144 mm; with tapered bore:790 min-1; |
| 191.20.1600.990.41.1502 Standard 5 Slewing Ring Bearings | P120°:136 kN; RG:1 NPT; Stabilizing ring:SR-40-34; H1:209.55 mm; R1:122.237 mm; J1:127 mm; J min.:571.5 mm; P180°:145 kN; Pa:60.9 kN; P90°:218 kN; A2:352.425 mm; N1:34.925 mm; J max.:635 mm; Cap bolt recommended tightening torque:271.2 N·m; ba:91.281 mm; L:749.3 mm; R2:42.862 mm; Housing:SAF 634; Cap bolt, SAE grade:5; Taconite seal:TER 139; |
| 60.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | d1 ≈:515 mm; r1,2 min.:3 mm; Calculation factor Y0:1.8; D1 ≈:570 mm; Calculation factor Y1:1.9; D:622.3 mm; B:365.125 mm; Comparative axial load rating CFa:259 kN; Calculation factor e:0.35; Design variant/feature:TQO/GWI; Fatigue load limit Pu:1290 kN; Thrust factor K:1.66; Mass bearing:265 kg; Basic dynamic load rating C:5610 kN; d:488.95 mm; T:365.125 mm; Basic static load rating C0:17300 kN; |
| 162.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | l2 max.:107 mm; Basic dynamic load rating C:30 kN; Mass rod end:0.32 kg; r1 min.:0.3 mm; l1 min.:43 mm; h:78 mm; B:16 mm; α:9 °; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:42.5 kN; d:20 mm; G:M 20x1.5; Material constant KM:330; d2 max.:54 mm; C1 max.:13.5 mm; l7 min.:24 mm; dk:29 mm; |
| 61.30.1180.001.21.1504 Standard 5 Slewing Ring Bearings | Fw:18 mm; Reference speed:20000 r/min; Basic static load rating C0:29 kN; Basic dynamic load rating C:22 kN; Limiting speed:24000 r/min; Fatigue load limit Pu:3.55 kN; Ew:25 mm; U:22 mm; Mass needle roller and cage assembly:0.023 kg; |
| 92.35.1704.991.41.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:156000 N; Basic Dynamic Radial Load Rating C:127000 N; Oil Speed Rating n2:3200 rpm; Fillet Radius ra:2.00 mm; d:160.000 mm; D:220.0000 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius rb:1.00 mm; B:28.00 mm; |
| 12.20.1360.001.21.1504 Standard 5 Slewing Ring Bearings | Basic static load rating C0:91.5 kN; Fatigue load limit Pu:10.4 kN; r3,4 min.:2 mm; C:20 mm; Db min.:83 mm; d1 ≈:66.25 mm; Da max.:81 mm; d:50.8 mm; Mass bearing:0.58 kg; Calculation factor e:0.31; Calculation factor Y:1.9; Reference speed:6300 r/min; Dimension series:365; da max.:58 mm; Limiting speed:7500 r/min; db min.:63.5 mm; rb max.:2 mm; T:25 mm; Basic dynamic load rating C:94 kN; r1,2 min.:3.5 mm; |
| 61.20.0844.575.01.1403 Standard 5 Slewing Ring Bearings | α:9 °; Mass plain bearing:0.023 kg; d:12.7 mm; dk:18.263 mm; da min.:14.3 mm; M:1.5 mm; d1 ≈:15.875 mm; Lubricant:Regular relubricatio; da max.:15.9 mm; C:9.525 mm; Basic static load rating C0:41.5 kN; B:19.05 mm; Specific static load factor K0:300 N/mm²; b:2.6 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; D:22.225 mm; b1:2.5 mm; rb max.:0.6 mm; r1 min.:0.3 mm; |
| 61.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:85000 N; Fillet Radius ra:2.00 mm; d:85.000 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:90400 N; Oil Speed Rating n2:4900 rpm; B:28.00 mm; Grease Speed Rating n1:3800 rpm; |
| 161.36.1800.890.11.1503 Standard 5 Slewing Ring Bearings | Housing material:Machined steel; Flange design:Flange with metric a; Maximum load applied to top of disc:3 kN; l:17 mm; Minimum rotational disc speed min.:90 r/min; Recommended lower temperature limit for storage (static):-50 °C; Purpose/ Application:Tillage; s:2.5 mm; Maximum tractor speed max.:90 km/h; Basic static load rating C0:37.5 kN; Shaft design:Shaft with metric ma; Corrosion protection:Zinc-coated housing; |