| 281.30.1300.013 Type 110/1500.1 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:143000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:134000 N; D:130.0000 mm; B:54.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating n1:3400 rpm; |
| 162.28.1400.891.21.1503 Standard 5 Slewing Ring Bearings | d1:105 mm; G:M 80x2; d5:109 mm; Mass:1.05 kg; d3:110 mm; h:3.5 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 16; b:8 mm; B:32 mm; Recommended tightening torque:14.2 N·m; Grub (set) / Locking screw size:M 6; |
| 62.25.0886.109.21.1504 Standard 5 Slewing Ring Bearings | Mass pillow block:39.5 kg; Taconite seal:TER 657; P60°:141 kN; Stabilizing ring:2 x 38151-24; Pa:16.7 kN; H:222.25 mm; P150°:48 kN; End plug (suffix Y):EPR 14; H2:44.45 mm; Eye bolt:2 x 3/8-16 UNC; Da:180 mm; RG:3/8 NPT; ba:46.831 mm; Cap bolt recommended tightening torque:298.3 N·m; h:40.481 mm; Cap bolt:5/8-11 UNC; Adapter sleeve assembly:SNW 3024x4; PG:1/4 NPT; P180°:57.4 kN; |
| 92.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | B:32 mm; Recommended tightening torque:35 N·m; Axial static load carrying capacity:980 kN; Associated spanner (Hook spanner in accordance with DIN 1810):B 180-195; J1:165 mm; G:M 140x3; J2:17 mm; d1:166 mm; Grub (set) / Locking screw size:M 10; Mass:2.45 kg; d3:180 mm; N1:6.4 mm; d4:142 mm; N2:10 mm; |
| 191.20.1600.990.41.1502 Standard 5 Slewing Ring Bearings | P120°:136 kN; RG:1 NPT; Stabilizing ring:SR-40-34; H1:209.55 mm; R1:122.237 mm; J1:127 mm; J min.:571.5 mm; P180°:145 kN; Pa:60.9 kN; P90°:218 kN; A2:352.425 mm; N1:34.925 mm; J max.:635 mm; Cap bolt recommended tightening torque:271.2 N·m; ba:91.281 mm; L:749.3 mm; R2:42.862 mm; Housing:SAF 634; Cap bolt, SAE grade:5; Taconite seal:TER 139; |
| 61.25.1355.575.11.1403 Standard 5 Slewing Ring Bearings | B:49 mm; l2 max.:319 mm; l1 min.:125 mm; Mass rod end:7.9 kg; r1 min.:1 mm; dk:92 mm; Material constant KM:330; l7 min.:85 mm; d:70 mm; Specific dynamic load factor K:100 N/mm²; G:M 56x4; α:6 °; d2 max.:162 mm; Basic static load rating C0:490 kN; C1 max.:43 mm; h:235 mm; Basic dynamic load rating C:315 kN; |
| 161.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | r1,2 min.:1.1 mm; d:110 mm; Reference speed:1700 r/min; D:160 mm; R:125 mm; Da max.:135 mm; H:40.2 mm; Basic static load rating C0:365 kN; Fatigue load limit Pu:11.6 kN; C:14 mm; Limiting speed:2400 r/min; Mass bearing (including seat washer where applicable):2.91 kg; da min.:140 mm; D3:165 mm; D2:135 mm; Basic dynamic load rating C:125 kN; H1:45 mm; Minimum load factor A:0.79; d1 ≈:160 mm; ra max.:1 mm; |
| 62.25.1255.500.11.1503 Standard 5 Slewing Ring Bearings | B:38.10 mm; d:60.000 mm; Fillet Radius ra:1.50 mm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:58500 N; Oil Speed Rating n2:5000 rpm; D:110.0000 mm; Sealed Speed Rating n3:3800 rpm; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:70200 N; |
| 62.30.1400.000.11.1504 Standard 5 Slewing Ring Bearings | H2:28.575 mm; h:28.575 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 7; S:3.175 mm; A1:79.375 mm; Appropriate attachment bolt size G:0.625 in; Mass pillow block:12.7 kg; R2:21.431 mm; da:61.913 mm; Cap bolt:2 x 1/2-13 UNC; Initial grease fill:68.04 g; Pa:6.94 kN; Stabilizing ring:SR-15-0; Taconite seal:TER 37; RG:1/4 NPT; Ca:37.008 mm; P90°:45.4 kN; Max. speed for Taconite seal:1250 r/min; |
| 61.25.0980.108.21.1504 Standard 5 Slewing Ring Bearings | B:25.40 mm; Oil Speed Rating Max. n2:8000 rpm; X-L-O Part Number:55-27; Grease Speed Rating Max. n1:5000 rpm; D:50.8000 mm; Keyway f:1.6 mm; Oil Mist Speed Rating Max. n3:12000 rpm; d:20.640 mm; Preload:50 lb; Keyway e:21.4 mm; Fillet Radius ra:1.00 mm; |
| 12.20.1085.001.21.1504 Standard 5 Slewing Ring Bearings | d:80.000 mm; D:110.0000 mm; B:16.00 mm; Oil Speed Rating n2:19000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:36000 N; Grease Speed Rating n1:13000 rpm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:34500 N; |
| 230.20.0900.503 Type 21/1050. Standard 5 Slewing Ring Bearings | l3 min.:65 mm; l5 ≈:25 mm; Basic dynamic load rating C:100 kN; d2 max.:94 mm; d4 ≈:58 mm; w:50 mm; dk:53 mm; Material constant KM:330; B:28 mm; l4 max.:194 mm; r1 min.:0.6 mm; G:M 42x3; Mass rod end:2.2 kg; Basic static load rating C0:166 kN; α:7 °; d:40 mm; C1 max.:24 mm; h1:145 mm; Specific dynamic load factor K:100 N/mm²; l7 min.:50 mm; |