| No. | Brand | M | T | B | d | s | A | N | E |
| 161.28.1700.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.30.1500.201.21.1523 | Standard 5 | - | - | 65.00 mm | 380.000 mm | - | - | - | - |
| 11.25.1461.001.21.1503 | Standard 5 | - | - | 33.00 mm | 280.000 mm | - | - | - | - |
| 161.25.1180.890.11.1503 | Standard 5 | - | - | 27 mm | 30 mm | - | - | - | - |
| 61.25.0855.500.11.1503 | Standard 5 | - | - | - | - | 16 mm | 315 mm | 50 mm | - |
| 281.30.1275.013 Type 110/1400.1 | Standard 5 | - | - | - | 31.800 mm | - | - | - | - |
| 11.25.1200.601.21.1503 | Standard 5 | - | - | 118 mm | - | - | - | - | - |
| 230.20.1000.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0975.013 Type 21/1050.2 | Standard 5 | - | 46.038 mm | 46.038 mm | 120.65 mm | - | - | - | - |
| 62.40.1500.001.29.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.25.1055.575.11.1403 | Standard 5 | - | - | 15.00 mm | 20.000 mm | - | - | - | - |
| 191.25.1800.990.41.1502 | Standard 5 | - | - | 45 mm | - | - | - | - | - |
| 61.20.1094.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.35.1750.700.11.1503 | Standard 5 | - | - | 13.00 mm | 65.000 mm | - | - | - | - |
| 281.30.1175.013 Type 110/1300.1 | Standard 5 | - | - | 45 mm | - | - | - | - | - |
| 232.20.0900.013 Type 21/1050.2 | Standard 5 | - | - | 55 mm | 80 mm | - | - | - | - |
| 11.30.1734.000.11.1503 | Standard 5 | - | - | 44 mm | 60 mm | - | - | - | - |
| 280.30.1200.013 Type 110/1400. | Standard 5 | - | - | 30.429 mm | 200 mm | - | - | - | - |
| 162.25.1077.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1075.013 Type 110/1200.2 | Standard 5 | - | - | 21.00 mm | 55.000 mm | - | - | - | - |
| 12.20.1085.000.11.1504 | Standard 5 | - | - | - | - | 30 mm | - | - | - |
| 92.20.1246.991.21.1503 | Standard 5 | - | - | 25.00 mm | 75.000 mm | - | - | - | - |
| 162.36.1900.890.11.1503 | Standard 5 | - | - | 16 mm | 20 mm | - | - | - | - |
| 161.36.1700.890.11.1503 | Standard 5 | - | - | - | 35 mm | - | - | - | - |
| 91.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1200.013 Type 110/1400.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1475.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.1375.013 Type 110/1500.1 | Standard 5 | - | - | 82.55 mm | 100.000 mm | - | - | - | - |
| 92.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings | J max.:295.275 mm; da:60.325 mm; PG:1/8 NPT; P150°:34.7 kN; Initial grease fill:141.75 g; P120°:38.3 kN; A1:98.425 mm; P90°:60.9 kN; Appropriate attachment bolt size G:0.625 in; Cap bolt, SAE grade:8; J1:53.975 mm; S:4.763 mm; Labyrinth ring:2 x LOR 36; H2:41.275 mm; R1:60.325 mm; ba:44.45 mm; h:40.481 mm; Bearing limiting speed:4300 r/min; Cap bolt:2 x 5/8-11 UNC; L:349.25 mm; |
| 62.40.1500.001.29.1504 Standard 5 Slewing Ring Bearings | Ca:107.798 mm; Max. speed for Taconite seal:425 r/min; Mass pillow block:267 kg; R1:122.237 mm; H:419.1 mm; A2:358.775 mm; Housing:SSAFS 540; RG:1 NPT; P120°:207 kN; ba:83.344 mm; H1:209.55 mm; Eye bolt:2 x 1/2-13 UNC; h:62.706 mm; R2:42.862 mm; End plug (suffix Y):EPR 21; Stabilizing ring:SR-40-34; L:749.3 mm; da:180.975 mm; Cap bolt recommended tightening torque:2467.6 N·m; Pa:58.7 kN; |
| 231.20.1000.503 Type 21/1200.1 Standard 5 Slewing Ring Bearings | D:130.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:44200 N; Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:18000 N; B:31.00 mm; Grease Speed Rating n1:4500 rpm; d:75.000 mm; |
| 61.40.1800.014.29.1503 Standard 5 Slewing Ring Bearings | d:25.000 mm; Oil Speed Rating n2:11000 rpm; Accessories:No Shield, no Seal; B:20.60 mm; Grease Speed Rating n1:8000 rpm; Basic Dynamic Radial Load Rating C:20800 N; Basic Static Radial Load Rating Co:14000 N; D:52.0000 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8000 rpm; |
| 161.28.1600.890.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:4900 kN; Fatigue load limit Pu:390 kN; Mass bearing:95.5 kg; r1,2 min.:4 mm; da min.:315 mm; d:300 mm; D1 ≈:410 mm; Ca min.:2.8 mm; D:460 mm; Da min.:396 mm; Misalignment factor k1:0.105; d2 ≈:338 mm; s1 max.:30.4 mm; Reference speed:900 r/min; ra max.:3 mm; Basic dynamic load rating C:2900 kN; Operating clearance factor k2:0.106; da max.:362 mm; B:160 mm; Limiting speed:1200 r/min; |
| 231.20.0900.503 Type 21/1050.1 Standard 5 Slewing Ring Bearings | h:46.038 mm; Ca:72.619 mm; P90°:149 kN; Cap bolt recommended tightening torque:298.3 N·m; Mass pillow block:60.3 kg; N1:22.225 mm; Initial grease fill:379.89 g; Stabilizing ring:2 x 36053-50; Appropriate attachment bolt size G:0.75 in; A1:120.65 mm; Da:210 mm; PG:1/4 NPT; Pa:22.2 kN; J min.:336.55 mm; H2:53.975 mm; J1:69.85 mm; P120°:94.3 kN; End plug (suffix Y):EPR 27; P150°:87.2 kN; |
| 162.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:1200 rpm; Fillet Radius rb:1.50 mm; D:400.0000 mm; d:260.000 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1400 rpm; Basic Static Radial Load Rating Co:1320000 N; B:130.00 mm; Basic Dynamic Radial Load Rating C:702000 N; |
| 161.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | da min.:371 mm; r1,2 min.:5 mm; Da min.:507 mm; s1 max.:27.9 mm; Ca min.:3.9 mm; Misalignment factor k1:0.117; B1:229 mm; B2 ≈:238 mm; G:Tr 380x5; da max.:464 mm; Basic static load rating C0:8000 kN; Fatigue load limit Pu:585 kN; d2 ≈:423 mm; Operating clearance factor k2:0.094; B:192 mm; Basic dynamic load rating C:5000 kN; D:600 mm; d1:340 mm; Da max.:580 mm; G1:35 mm; |
| 61.30.1320.000.11.1504 Standard 5 Slewing Ring Bearings | da:93.662 mm; R1:67.866 mm; A2:231.775 mm; Taconite seal:TER 557; H1:125.425 mm; Stabilizing ring:2 x SR-1522; P180°:60.9 kN; J min.:320.675 mm; PG:1/4 NPT; P150°:50.7 kN; Cap bolt recommended tightening torque:203.4 N·m; Housing:SAF 522; H2:50.8 mm; P90°:89 kN; ba:42.069 mm; P120°:55.6 kN; Cap bolt:2 x 3/4-10 UNC; J1:69.85 mm; Initial grease fill:481.95 g; Da:200 mm; |
| 161.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | J:104.775 mm; Basic dynamic load rating C:77 kN; a:3.969 mm; da:42.862 mm; d2:68.659 mm; A6:19.05 mm; N1:14.287 mm; S:0.794 mm; Mass bearing unit:4.54 kg; B:73.025 mm; Attachment bolt diameter G:12.7 mm; A:58.737 mm; s:25.4 mm; Limiting speed:4500 r/min; A5:29.369 mm; A1:76.994 mm; L:136.525 mm; |
| 11.35.1750.701.41.1503 Standard 5 Slewing Ring Bearings | D:250.0000 mm; Basic Static Radial Load Rating Co:132000 N; Basic Dynamic Radial Load Rating C:119000 N; B:33.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Sealed Speed Rating n3:1500 rpm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2200 rpm; d:180.000 mm; Fillet Radius ra:2.00 mm; |
| 282.30.1275.013 Type 110/1400.2 Standard 5 Slewing Ring Bearings | B:45 mm; M3:22 mm; M:21 mm; M1:7 mm; Mass locking clip:0.22 kg; Spring washer in accordance with DIN 128:A 20; M2:54 mm; Hexagonal head bolt:M 20x40; |