| 91.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | with cylindrical bore:670 min-1; Dynamic (Cr):9 mm; Pu:2240 kN; Oil:311.540 kN; Static (Cor):16.7 mm; Grease:3720 kN; d:260 mm; rs (min):4 mm; D:440 mm; B:144 mm; with tapered bore:790 min-1; |
| 62.25.0886.109.21.1504 Standard 5 Slewing Ring Bearings | Mass pillow block:39.5 kg; Taconite seal:TER 657; P60°:141 kN; Stabilizing ring:2 x 38151-24; Pa:16.7 kN; H:222.25 mm; P150°:48 kN; End plug (suffix Y):EPR 14; H2:44.45 mm; Eye bolt:2 x 3/8-16 UNC; Da:180 mm; RG:3/8 NPT; ba:46.831 mm; Cap bolt recommended tightening torque:298.3 N·m; h:40.481 mm; Cap bolt:5/8-11 UNC; Adapter sleeve assembly:SNW 3024x4; PG:1/4 NPT; P180°:57.4 kN; |
| 12.20.1360.001.21.1504 Standard 5 Slewing Ring Bearings | Basic static load rating C0:91.5 kN; Fatigue load limit Pu:10.4 kN; r3,4 min.:2 mm; C:20 mm; Db min.:83 mm; d1 ≈:66.25 mm; Da max.:81 mm; d:50.8 mm; Mass bearing:0.58 kg; Calculation factor e:0.31; Calculation factor Y:1.9; Reference speed:6300 r/min; Dimension series:365; da max.:58 mm; Limiting speed:7500 r/min; db min.:63.5 mm; rb max.:2 mm; T:25 mm; Basic dynamic load rating C:94 kN; r1,2 min.:3.5 mm; |
| 92.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | D:225.0000 mm; B:54.00 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Basic Static Radial Load Rating Co:150000 N; Accessories:Two Seals & Snap-Rin; Grease Speed Rating Open/Shielded n1:3000 rpm; Sealed Speed Rating n3:2100 rpm; Fillet Radius ra:3.00 mm; |
| 12.30.1800.000.11.1503 Standard 5 Slewing Ring Bearings | d3:220 mm; d1:152.4 mm; Mass adapter sleeve assembly:5.5 kg; B:33 mm; d:170 mm; Hydraulic nut:HMV 34 E; G:M 170x3; B1:101 mm; |
| 62.30.1600.000.11.1504 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.50 mm; B:42.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Basic Static Radial Load Rating Co:104000 N; Oil Speed Rating Open/Shielded n2:4500 rpm; D:180.0000 mm; d:70.000 mm; Basic Dynamic Radial Load Rating C:143000 N; |
| 91.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | P120°:87.2 kN; da:133.35 mm; R1:95.25 mm; Ca:82.804 mm; J min.:431.8 mm; Housing:SAF 530; A1:158.75 mm; P150°:80.1 kN; Mass pillow block:91.6 kg; Labyrinth ring:2 x LOR 126; Bearing limiting speed:3000 r/min; H1:160.325 mm; Cap bolt, SAE grade:5; P90°:138 kN; Initial grease fill:623.7 g; Stabilizing ring:SR-30-0; R2:39.688 mm; Pa:32.7 kN; A2:215.9 mm; RG:3/4 NPT; |
| 162.25.1250.890.11.1503 Standard 5 Slewing Ring Bearings | Fw:8 mm; Ew:12 mm; Basic dynamic load rating C:4.84 kN; Limiting speed:34000 r/min; Fatigue load limit Pu:0.54 kN; Reference speed:30000 r/min; U:10 mm; Basic static load rating C0:4.75 kN; Mass needle roller and cage assembly:0.002 kg; |
| 162.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | RG:3/8 NPT; R1:53.975 mm; J min.:250.825 mm; H:180.975 mm; S:4.763 mm; H1:95.25 mm; P120°:31.6 kN; End plug (suffix Y):EPR 9; P150°:28.5 kN; Stabilizing ring:SR-17-14; R2:22.225 mm; L:330.2 mm; N1:22.225 mm; P60°:84.5 kN; Initial grease fill:110.56 g; Da:150 mm; A1:88.9 mm; P90°:50.7 kN; h:34.925 mm; Max. speed for Taconite seal:1050 r/min; |
| 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | Cap bolt:2 x 3/4-10 UNC; Da:200 mm; H:239.316 mm; RG:3/8 NPT; Ca:62.789 mm; N1:22.225 mm; Pa:17.3 kN; PosiTrac Plus contact element:2 x B10724-109; R1:67.866 mm; End plug (suffix Y):EPR 13; Initial grease fill:232.47 g; h:45.244 mm; P180°:60.9 kN; Max. speed for PosiTrac Plus seal:1450 r/min; P120°:55.6 kN; A2:165.1 mm; R2:31.75 mm; Cap bolt recommended tightening torque:203.4 N·m; ba:50.006 mm; |
| 11.30.1440.190.11.1503 Standard 5 Slewing Ring Bearings | D:6.0000 in; Grease Speed Rating n1:3900 rpm; d:4.250 in; Oil Speed Rating n2:6700 rpm; Basic Dynamic Radial Load Rating C:61800 N; Basic Static Radial Load Rating Co:69500 N; Fillet Radius ra:0.08 in; B:0.8750 in; Fillet Radius rb:0.040 in; |
| 231.20.0900.503 Type 21/1050.1 Standard 5 Slewing Ring Bearings | h:46.038 mm; Ca:72.619 mm; P90°:149 kN; Cap bolt recommended tightening torque:298.3 N·m; Mass pillow block:60.3 kg; N1:22.225 mm; Initial grease fill:379.89 g; Stabilizing ring:2 x 36053-50; Appropriate attachment bolt size G:0.75 in; A1:120.65 mm; Da:210 mm; PG:1/4 NPT; Pa:22.2 kN; J min.:336.55 mm; H2:53.975 mm; J1:69.85 mm; P120°:94.3 kN; End plug (suffix Y):EPR 27; P150°:87.2 kN; |