| 92.25.1154.990.11.1503 Standard 5 Slewing Ring Bearings | L:112 mm; Mass bearing unit:1.15 kg; Recommended diameter for attachment bolts, mm G:12 mm; s1:32.6 mm; d:49.213 mm; Thread grub screw G2:3/8-24 UNF; A1:20 mm; H:185 mm; T:56.6 mm; J:60 mm; Basic static load rating C0:23.2 kN; Limiting speed with shaft tolerance h6:2200 r/min; L1:100 mm; B4:9 mm; Recommended tightening torque for grub screw:16.5 N·m; N:14 mm; H1:68 mm; B:51.6 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 92.30.1607.991.21.1502 Standard 5 Slewing Ring Bearings | Da max.:11.5 mm; Calculation factor f0:6.4; Reference speed:110000 r/min; Fatigue load limit Pu:0.011 kN; d2 ≈:6 mm; Basic static load rating C0:0.25 kN; B:5 mm; r1,2 min.:0.2 mm; D2 ≈:11.35 mm; d:3 mm; D:13 mm; Basic dynamic load rating C:0.741 kN; ra max.:0.2 mm; da min.:4.6 mm; Limiting speed:70000 r/min; Calculation factor kr:0.035; Mass bearing:0.0029 kg; |
| 62.30.1120.001.21.1504 Standard 5 Slewing Ring Bearings | d:170 mm; B:26 mm; B4:29 mm; Mass adapter sleeve assembly:7.15 kg; G:M 170x3; d1:150 mm; d3:200 mm; B1:122 mm; Hydraulic nut:HMV 34 E; |
| 61.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Hydraulic nut:HMVC 10E; B:12.954 mm; d1:41.275 mm; Sleeve:S 10x1.5/8; B4:14.173 mm; d3 max.:68.402 mm; G:49.962 mm; d:50 mm; Mass adapter sleeve assembly:0.33 kg; B1:44.577 mm; Threads per inch:18; |
| 280.30.1375.013 Type 110/1500. Standard 5 Slewing Ring Bearings | Bearing number:46368A; Size (mm):340x580x238; Bore Diameter (mm):340; Outer Diameter (mm):580; Width (mm):238; d:340 mm; D:580 mm; T:238 mm; C:190 mm; r min.:6 mm; r1 min.:2 mm; da min.:368 mm; Da min:543 mm; ra max.:5 mm; rb max.:2 mm; Weight:244 Kg; Basic dynamic load rating (C):3160 kN; Basic static load rating (C0):6340 kN; (Grease) Lubrication Speed:370 r/min; (Oil) Lubrication Speed:500 r/min; |
| 62.25.0886.801.21.1504 Standard 5 Slewing Ring Bearings | B:52.00 mm; Grease Speed Rating n1:3000 rpm; Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating C:135000 N; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; D:140.0000 mm; d:80.000 mm; Basic Static Radial Load Rating Co:146000 N; |
| 12.20.0895.000.11.1504 Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:203.4 N·m; J1:117.475 mm; P90°:140 kN; Eye bolt:2 x 3/8-16 UNC; A2:250.825 mm; Pa:60.5 kN; PosiTrac Plus contact element:2 x B10724-148; Ca:121.818 mm; h:60.325 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 19; P180°:89 kN; R1:114.3 mm; H:377.825 mm; H2:76.2 mm; S:4.763 mm; R2:41.275 mm; A1:180.975 mm; P60°:234 kN; Stabilizing ring:SR-36-30; |
| 61.25.1055.575.11.1403 Standard 5 Slewing Ring Bearings | da:80.963 mm; Ca:49.809 mm; J min.:263.525 mm; Cap bolt recommended tightening torque:149.1 N·m; Appropriate attachment bolt size G:0.75 in; S:4.763 mm; R1:60.325 mm; N1:23.813 mm; P150°:48 kN; H:196.85 mm; J max.:295.275 mm; P60°:141 kN; P180°:58.7 kN; h:38.1 mm; H1:101.6 mm; R2:27.781 mm; Cap bolt:1/2-13 UNC; P90°:84.5 kN; Max. speed for Taconite seal:950 r/min; End plug (suffix Y):EPR 11; |
| 92.35.1704.990.11.1502 Standard 5 Slewing Ring Bearings | Limiting speed:11000 r/min; Mass bearing:0.28 kg; Fatigue load limit Pu:14.6 kN; da:47.2 mm; E:48 mm; ra max.:0.3 mm; Basic static load rating C0:118 kN; Reference speed:10000 r/min; Db:40.6 mm; r1,2 min.:0.3 mm; Da:47.5 mm; D:55 mm; C:40 mm; Fw:40 mm; Basic dynamic load rating C:59.4 kN; |
| 92.25.1154.991.21.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:3800 rpm; d:70.000 mm; B:42.00 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:104000 N; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2600 rpm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:143000 N; Accessories:Two Shields & Snap-R; |
| 62.25.1180.000.11.1504 Standard 5 Slewing Ring Bearings | PosiTrac Plus contact element:2 x B10724-148; J min.:530.225 mm; h:60.325 mm; A2:250.825 mm; A1:180.975 mm; R1:114.3 mm; H1:190.5 mm; J1:117.475 mm; N1:28.575 mm; Cap bolt, SAE grade:5; Housing:SAW 536; Pa:60.5 kN; L:679.45 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:4 x 3/4-10 UNC; J max.:600.075 mm; P180°:89 kN; Da:319.999 mm; P150°:75.6 kN; P120°:84.5 kN; |
| 61.30.1320.000.11.1504 Standard 5 Slewing Ring Bearings | da:93.662 mm; R1:67.866 mm; A2:231.775 mm; Taconite seal:TER 557; H1:125.425 mm; Stabilizing ring:2 x SR-1522; P180°:60.9 kN; J min.:320.675 mm; PG:1/4 NPT; P150°:50.7 kN; Cap bolt recommended tightening torque:203.4 N·m; Housing:SAF 522; H2:50.8 mm; P90°:89 kN; ba:42.069 mm; P120°:55.6 kN; Cap bolt:2 x 3/4-10 UNC; J1:69.85 mm; Initial grease fill:481.95 g; Da:200 mm; |