| 12.25.1360.601.21.1503 Standard 5 Slewing Ring Bearings | r2 min.:1 mm; da max.:34.4 mm; Design (sliding contact surface combination):Steel/steel; dk:47 mm; Specific static load factor K0:500 N/mm²; b:3.9 mm; Lubricant:Regular relubricatio; D:55 mm; d:30 mm; α:17 °; b1:3.9 mm; C:20 mm; Sealing solution:Triple-lip seals; M:2.5 mm; r1 min.:0.6 mm; rb max.:1 mm; Da max.:50.9 mm; Basic dynamic load rating C:80 kN; B:32 mm; Mass plain bearing:0.35 kg; |
| 161.28.1600.891.21.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:20.5 kN; Ew:24 mm; Fatigue load limit Pu:2.9 kN; Fw:16 mm; U:20 mm; Limiting speed:24000 r/min; Basic static load rating C0:23.6 kN; Reference speed:22000 r/min; Mass needle roller and cage assembly:0.022 kg; |
| 61.25.1255.575.11.1403 Standard 5 Slewing Ring Bearings | Dynamic (Cr):4.5 mm; with cylindrical bore:1 600 min-1; d:140 mm; Grease:1030 kN; B:68 mm; Static (Cor):8.3 mm; Oil:104.870 kN; rs (min):2.1 mm; D:225 mm; Pu:629 kN; with tapered bore:2 000 min-1; |
| 191.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Mass plain bearing:11 kg; d:140 mm; M:6 mm; Basic dynamic load rating C:1600 kN; rb max.:1 mm; B:90 mm; D:210 mm; Design (sliding contact surface combination):Steel/steel; da max.:155.5 mm; Da min.:180 mm; Da max.:202.5 mm; Sealing solution:Triple-lip seals; da min.:149 mm; b:13.5 mm; b1:13.5 mm; Material constant KM:330; Specific static load factor K0:500 N/mm²; α:7 °; C:70 mm; r2 min.:1 mm; |
| 62.25.0886.109.21.1504 Standard 5 Slewing Ring Bearings | Mass pillow block:39.5 kg; Taconite seal:TER 657; P60°:141 kN; Stabilizing ring:2 x 38151-24; Pa:16.7 kN; H:222.25 mm; P150°:48 kN; End plug (suffix Y):EPR 14; H2:44.45 mm; Eye bolt:2 x 3/8-16 UNC; Da:180 mm; RG:3/8 NPT; ba:46.831 mm; Cap bolt recommended tightening torque:298.3 N·m; h:40.481 mm; Cap bolt:5/8-11 UNC; Adapter sleeve assembly:SNW 3024x4; PG:1/4 NPT; P180°:57.4 kN; |
| 92.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | B:32 mm; Recommended tightening torque:35 N·m; Axial static load carrying capacity:980 kN; Associated spanner (Hook spanner in accordance with DIN 1810):B 180-195; J1:165 mm; G:M 140x3; J2:17 mm; d1:166 mm; Grub (set) / Locking screw size:M 10; Mass:2.45 kg; d3:180 mm; N1:6.4 mm; d4:142 mm; N2:10 mm; |
| 92.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | H:24 mm; Pu:4.770 kN; d:35 mm; D1:37 mm; Grease:2 800 min-1; static Cor:105.000 kN; D:68 mm; rs (min):1 mm; Oil:3 800 min-1; d1:68 mm; dynamic Cr:58.830 kN; |
| 230.20.1000.013 Type 21/1200. Standard 5 Slewing Ring Bearings | J max.:708.025 mm; Mass pillow block:356 kg; S:4.763 mm; End plug (suffix Y):EPR 23; R1:130.175 mm; RG:1 NPT; h:79.375 mm; Bearing limiting speed:2000 r/min; Stabilizing ring:SR-44-38; L:831.85 mm; da:198.438 mm; A1:222.25 mm; Housing:SAFS 544; Cap bolt, SAE grade:8; H2:95.25 mm; Cap bolt recommended tightening torque:4284.4 N·m; Initial grease fill:2749.95 g; Cap bolt:1 1/2-6 UNC; Ca:117.805 mm; |
| 60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | B:13.00 mm; d:95.000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; Fillet Radius ra:1.00 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:19900 N; Sealed Speed Rating n3:3000 rpm; Basic Static Radial Load Rating Co:21200 N; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:One Shield; |
| 62.25.1055.500.11.1503 Standard 5 Slewing Ring Bearings | A2:419.1 mm; PG:1/4 NPT; Da:419.999 mm; Housing:SAF 056 KAUB; ba:100.806 mm; Cap bolt:4 x 1 1/2-6 UNC; A1:228.6 mm; R1:163.512 mm; Cap bolt recommended tightening torque:1017 N·m; H1:250.825 mm; L:869.95 mm; H:495.3 mm; h:73.025 mm; Pa:89 kN; J1:139.7 mm; P180°:185 kN; Max. speed for Taconite seal:310 r/min; J max.:749.3 mm; Initial grease fill:3515.4 g; Appropriate attachment bolt size G:1.5 in; |
| 12.20.1085.000.11.1504 Standard 5 Slewing Ring Bearings | N1:48 mm; Locating ring:2 x FRB 10/650; Ca:220 mm; A1:390 mm; H2:125 mm; P180°:3500 kN; P150°:2700 kN; da:380 mm; L:1120 mm; Cap bolt, rec. tightening torque:600 N·m; Cap bolt, size:M 36x240; Appropriate attachment bolt, size G:42 mm; N4 max.:35 mm; s:30 mm; Q120°:4200 kN; J1:240 mm; Oil seal:2 x TSD 3180 U; J:950 mm; J6:1020 mm; Oil level, min.:99 mm; |
| 91.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:163000 N; Fillet Radius ra:2.00 mm; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; B:58.70 mm; Basic Dynamic Radial Load Rating C:154000 N; D:140.0000 mm; |